Configure VTAP
This section teaches you how to configure your VTAP reader.
It starts with configuration that is common to all VTAP readers:
How VTAP100 works video | How a VTAP reader works?
Configure a VTAP reader | Default operation
Reading your own passes | Reading cards or tags | Serial integration
Then moves into topics which are only relevant when you are using certain VTAP reader models:
Access control | Using OSDP | NFC card emulation | Use with Read-a-Card
The section ends with less common operations such as checking status, updating firmware and resetting the device and finally a reference dictionary of settings and commands that can be used with your VTAP reader:
Default config.txt | Default leds.ini
Settings in config.txt | Settings in other files | Serial commands
If you can't find the answer you are looking for try using the Search bar above.
If you prefer a complete document or reference, most of this information is included in pdf User Guide documents VTAP Configuration Guide, VTAP Serial Integration Guide and VTAP Commands Reference. These are also supplemented by pdf Application Notes for ECC key pairs, Reading DESFire data, Access Control - Wiegand, Using OSDP and NFC card emulation.
Related reading:
