command.txt commands

This section lists all valid commands for command.txt. This is a file which must contain the string !VTAPcommand at the start.

There is a simple example in the section Reboot, remount, refresh commands.

Commands below: reboot | refresh | remount

reboot
Definition:

Power cycle the VTAP, as if the USB cable was disconnected momentarily.

Options:  
Default value: N/A
Example value: reboot
refresh
Definition:

Force the VTAP to re-read config.txt. This useful if you have renamed a file to be config.txt as file renaming is not automatically recognized by the VTAP.

Options:  
Default value: N/A
Example value: refresh
remount
Definition:

Remove the drive from the operating system briefly and then attach it again. This will force the operating system to re-read any changes that were made to the file system by the VTAP.

Options:  
Default value: N/A
Example value: remount